Maybe you are just thinking about buying a suitable recuperation unit for your home. In one of the previous posts, we introduced you to our compact RECUPER UNIT GEO EVO. Today, we would like to show you how to take care of the equipment in the best possible way, so that you can insure clean air, keep energy consumption as low as possible, prevent noisy operation and overall extend the life of the recuperation unit as much as possible.

System maintenance is not good to underestimate for the above reasons, but at the same time there is nothing to worry about. In terms of difficulty, we can divide it into two types. The smaller, more frequent one should be done every 3 months and the larger one a maximum of 1 a year, depending on the quality of the outdoor air around your dwelling.

For minor maintenance, it is enough to simply open the corner cover, remove the filter, check its condition by looking and if it is satisfactory and the filter does not require replacement (usually after about 2 years), it is enough to clean it using the dry method, that is, with a brush or vacuum cleaner. Before returning the cover, remember that each unit has 2 filters. And it's...

For major maintenance, it is necessary to unscrew 6 screws from the unit cover, remove the entire cover. In front of us we will see the recuperator and 2 fans to the right and left of the recuperator. It is these elements that require more maintenance. We remove the recuperator completely from the unit by unscrewing 2 side screws and we can wash it preferably with a stream of water. Before returning, it is important that the recuperator is completely dry. We then clean the fans from dust. That's all...

Maintenance is therefore really simple and the time spent on it geo EVO will fully return you in perfect long-term functionality.